RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
2. Remove the three screws (3) at each trailing edge of the fascia.
3. Remove the five lower screws (8) .
4. Remove and discard the four upper push pins (7).
5. Using a trim stick (special tool #C-4755) or equivalent, carefully release the six lower clips and remove the close out panel.
6. Using a trim stick or equivalent, carefully remove the step pad (1).
7. Spread the fascia (2) out at the wheels and remove from the vehicle.