RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Install the hinge and install the b-pillar bolts.
2. Tighten the upper hinge bolt (2) to 28 Nm (21 ft. lbs.).
3. Tighten the upper hinge bolt (1) to 28 Nm (21 ft. lbs.).
4. Tighten the upper hinge bolt (3) to 28 Nm (21 ft. lbs.).
5. Install the hinge to door washers, if there were removed previously, nut and bolt and tighten to 28 Nm (21 ft. lbs.).
6. Adjust the door if needed.
7. Install the lower b-pillar trim.