RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Seat Cushion: Service and Repair
Removal
REMOVAL
1. Remove the center seat.
2. Remove the center armrest/seat back.
Installation
INSTALLATION
1. Install the center armrest/seat back.
2. Install the center seat.
Removal
REMOVAL
1. Remove the center seat cushion or underseat storage bin lid.
2. Disconnect the zip strips and remove the cover from the cushion.
Installation
INSTALLATION
1. Install the cover over the center seat cushion and connect the zip strips.
2. Install the center seat cushion or under seat storage bin lid.
Removal
REMOVAL
1. Remove the front seat.
2. Remove the screw and remove the recliner handle.
3. Remove the two screws and remove the power seat controls, if equipped, and disconnect the electrical connector.
4. Disconnect the j-straps and remove the seat cushion and cover.
Installation
INSTALLATION
1. Position the seat cushion and cover onto the frame assembly and connect the j-straps.
2. Connect the power seat control switch electrical connector, if equipped.
3. Install the power seat control switch and install the two screws, if equipped.
4. Install the recliner handle and install the screw.
5. Install the front seat.
Removal
REMOVAL
1. Remove the rear seat.
2. Separate the zip strip at the rear of the seat cushion and remove the cushion and cover.
Installation
INSTALLATION