RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Vacuum Brake Booster: Service and Repair
Installation
INSTALLATION
1. Guide the booster (2) studs into the cowl panel holes and seat the booster on the panel.
2. Install and tighten new booster attaching nuts (1) to 28 Nm (250 in. lbs.).
3. Install the booster push rod on brake pedal and install clip.
4. Install the booster check valve if removed and connect the vacuum hose to the check valve.
5. Install the master cylinder.
6. Fill and bleed the brake system.
