RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
9. Connect electrical connector (5) to EGR Actuator.
10. Install EGR crossover tube cover (1) and four bolts (2).
11. Install EGR valve heat shield (2). Tighten bolts/nuts to 10 Nm (7 ft. lbs.).
9. Connect electrical connector (5) to EGR Actuator.
10. Install EGR crossover tube cover (1) and four bolts (2).
11. Install EGR valve heat shield (2). Tighten bolts/nuts to 10 Nm (7 ft. lbs.).