RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Battery Cable: Service and Repair
Battery Cables - Installation
INSTALLATION
NEGATIVE - GASOLINE ENGINE
1. Position the battery negative cable (5) in the vehicle.
2. One at a time, install the battery cable retaining pushpins (3) , fasteners and routing clips until the cable is secure in the vehicle.
3. Install the bolt (6) securing the negative cable (1) to the left frame rail.
4. Install the bolt (4) securing the negative cable (5) to the engine.
5. Install the bolt (4) securing the negative cable (3) to the left front fender.
6. Connect the battery negative cable terminal clamp (3).
7. Check the vehicle for normal operation.
POSITIVE - GASOLINE ENGINE
