RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
7. Install bearing remove cup (1) bearing (2) and nut (3). Tighten nut (3) to draw the bearing out.
Installation
INSTALLATION
1. Wipe axle shaft bearing bore clean.
2. Install axle shaft bearing with Installer 5063 (1) and Handle C-4171 (2).
CAUTION: Bearing must be installer with lettering facing outwards. Failure to follow these instructions will damage the bearing.
3. Install a new axle shaft seal with Installer 8694 (1).
4. Lubricate seal lip with gear lubricant.