RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Flywheel: Service and Repair
Removal
REMOVAL
1. Remove the transmission.
NOTE: Vehicles with Dual Mass Flywheel use an adapter plate between the flywheel and crank. This plate does not need to be removed.
2. Remove the dust cover bolts (1) and the dust cover (2).
3. Using the access hole, remove each flexplate-to-flywheel bolt (1). Use Barring Tool 7471B to rotate the engine and flywheel.
4. Remove the assembly place the flywheel (1) , clutch disc (2) , and pressure plate (3) assembly on a workbench.