RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
^
Using the VIN and part number list electronically transmitted to DIAL System Function 53 (involved dealers) or
^
Entering the VIN to DIAL System Function 69 or VIP (for the body style/model code) along with the following table (all dealers).
NOTE:
Body model code is also stamped on the body code plate.
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for this service with their dealers. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.
Use one of the following labor operation numbers and time allowances:
Labor Operation
Time
Number
Allowance
Inspect fuel tube and remove heat shield bolt
14786182
0.4 hours
Inspect and replace fuel tube and remove
14786183
1.1 hours
heat shield bolt
Add the cost of the recall part package plus applicable dealer allowance to your claim.
Note:
See the Warranty Administration Manual, Recall Claim Processing Section for complete recall claim processing instructions.
Parts Return
Not required.
Vehicle Not Available
If a vehicle is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner
Notification Form or describe the reason on a postcard and mail to:
Chrysler Corporation
CIMS 482-00-85