RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
Axle Shaft Seal And Bearing Installation
2. Install the axle shaft bearing with Installer C-4198 and Handle C-4171. Ensure that the bearing part number is against the installer. Verify that the
bearing in installed straight and the tool fully Contacts the axle tube when seating the bearing.
3. Install a new axle seal with Installer C-4076-B and Handle C-4735-1. When the tool contacts the axle tube, the seal is installed to the correct
depth.
4. Coat the lip of the seal with axle lubricant for protection prior to installing the axle shaft.
5. Install the axle shaft.
Heavy Duty
REMOVAL
1. Remove axle shaft.
Axle Seal Removal
2. Remove axle shaft seal from the end of the axle tube with a small pry bar.
Axle Shaft Bearing Removal Tool