RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
27. Remove the fuel line heat shield located on the inside of the left frame rail (Figure 4). Slide the heat shield rearward to access the lower body
flange.
28. Remove the rearmost three (3) plastic rivets from the left front wheel well splash shield. Pull the splash shield forward to access the lower body
flange.
Fig. 3
29. Drill two (2) 1/8 " pilot holes through the lower body flange as shown in Figure 3.
30. Install the provided clamps over the clutch line heat wrap convolute and attach the clamps to the lower body flange with the provided screws.
Tighten the screws to 60 in.lbs. (7 Nm).