RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
Fig.29 Remove/Install NVLD Pump
5. The NVLD pump snaps onto the EVAP canister mounting bracket. Press on release tab while sliding pump from bracket.
INSTALLATION
1. Install NVLD pump to EVAP canister mounting bracket (snaps on).
2. Install NVLD filter and bolt to EVAP canister mounting bracket. Refer to Torque Specifications.
3. Carefully install vapor/vacuum lines to NVLD pump, and install hose to filter. The vapor/vacuum lines and hoses must be firmly connected. Check
the vapor/vacuum lines at the NVLD pump, filter and EVAP canister purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble
Code (DTC) may be set.
4. Connect 3-way electrical connector to pump.