RAM 3500 Truck 4WD V8-5.9L VIN Z LDC (2000)
Garage Door Opener Transmitter: Description and Operation
A compartment near the front of the overhead console is designed to hold most garage door opener remote control transmitters. The transmitter is
mounted within the compartment with an adhesive backed hook and loop fastener patch and, when the compartment is closed, a push button in the center
of the compartment door is depressed to actuate the transmitter.
A transmitter mounting kit including the adhesive backed hook and loop fastener material is available for service. The garage door opener storage bin
door and the push button with three assorted length adapter pegs are also available for service replacement.
The garage door opener storage compartment door is opened by pressing the integral latch towards the front of the vehicle. When the compartment door
is opened, the push button unit is removed from the compartment by squeezing the latch tabs and pulling the unit downward. With the push button
removed, the garage door opener can be installed in the compartment using the adhesive-backed hook and loop fastener material provided.
With the transmitter mounted in the storage bin, adapter pegs located on the garage door opener push button unit are selected and mounted on one of two
posts on the back side of the push button. The combination of the adapter peg length and the push button post location must be suitable to depress the
button of the transmitter when the push button in the center of the garage door opener storage bin door is depressed. When the proper combination has
been selected, the push button is reinstalled in the compartment and the compartment door is closed.
See the owner's manual in the vehicle glove box for more information on the use and operation of the overhead console garage door opener storage bin.
