RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Winch Relay: Service and Repair
Winch Relay Pack - Installation
INSTALLATION
NOTE: Relay #4 shown, all others similar.
1. Install the control wires (2) to all the relays and install the nuts (1).
2. Tighten the nuts to 3 Nm (25 in. lbs.).
3. Install the red battery positive cable (1) and install the switch wire.
4. Install the nut and tighten to 10 Nm (85 in. lbs.).