RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Rear Wheel Anti Lock Valve - Installation
INSTALLATION
1. Install rwal valve (1) and Tighten the nuts (2) to 15 Nm (11 ft. lbs.).
2. Install the brake lines to the rwal valve and tighten to 19 Nm (170 in. lbs.).
3. Install the electrical harness connector to the rwal valve and secure the connector.
4. Install the battery.
5. Install the battery cables to the battery.
6. Bleed ABS brake system See: Brake Bleeding/Service and Repair.