RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Variations in rotor thickness will cause pedal pulsation, noise and shudder.
Measure rotor thickness at 6 to 12 points around the rotor face.
Position the micrometer (1) approximately 25.4 mm (1 in.) from the rotor (2) outer circumference for each measurement.
Thickness should not vary by more than 0.010 mm (0.0039 in.) from point-to-point on the rotor. Machine or replace the rotor if necessary.
