RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
7. Loosen the front engine mount bolts.
8. Use the engine support fixture No. 8534B to raise engine out of the front mounts.
9. Remove the engine oil dipstick.
10. Remove oil pan bolts, break the pan to block seal, and lower pan slightly.
11. Remove oil suction tube bolts and lower the suction tube into oil pan.
12. Remove the 2 bolts from the front of the engine block stiffener.
13. Remove the oil pan.
4x2
1. Remove the negative battery cables.
2. Raise and support the vehicle.
3. Remove the fan and fan shroudSee: Cooling System/Radiator Cooling Fan/Service and Repair/Removal and Replacement/Cooling Fan - Removal
4. Remove the starter See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Starter - Removal