RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Turn Signal Bulb: Service and Repair
Front Lamp Unit Bulb - Removal
BULB - PARK/TURN SIGNAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front lamp unit (1) from the front fender. See: Service and Repair/Front Lamp Unit - Removal.
3. Firmly grasp the park/turn signal bulb socket (3) on the back of the front lamp unit housing and rotate it counterclockwise about 30 degrees to
unlock it.
4. Pull the socket and bulb straight out from the keyed opening in the housing.
5. Pull the base of the bulb (2) straight out of the socket (1).