dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Retractor - Removal|Page 4568 > < Seat Belt Retractor - Removal|Page 4566
Page 9
background image

1. Remove the rear seat from the vehicle. See: Body and Frame/Seats/Service and Repair/Seat, Center/Seat - Removal.
2. Remove the screw (6) that secures the seat belt lower anchor (7) to the base of the inner C-pillar.
3. Unsnap the trim cover (4) from the front seat belt turning loop (3) and discard.
4. Remove the screw (5) that secures the seat belt turning loop to the height adjuster (1) on the upper C-pillar.
5. Remove the seat belt turning loop from the height adjuster.
6. Remove the upper trim (2) from the inside of the C-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar

Trim/C-Pillar Trim Panel - Removal.

7. Remove the lower trim (2) from the inside of the C-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar

Trim/C-Pillar Trim Panel - Removal 

8. Disengage the two clips that secure the belt web guide (5) to the C-pillar.
9. Remove the screw (3) that secures the lower bracket of the retractor (4) to the C-pillar.

10. Disengage the hooks on the upper retractor bracket from the slots in the C-pillar above the retractor mounting hole.
11. Remove the rear outboard seat belt and retractor from the C-pillar as a unit.

Rear Outboard - Quad Cab

REAR OUTBOARD - QUAD CAB

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,

buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar (R) Parts Catalog. Failure to follow these instructions may result in
possible serious or fatal injury.

NOTE: All seat belt retractors except the driver side front retractor include a switchable automatic locking mechanism. See: Description and

Seat Belt Retractor - Removal|Page 4568 > < Seat Belt Retractor - Removal|Page 4566