RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Stabilizer Link: Service and Repair
Link and Coil Front Suspension
Removal
REMOVAL
1. Raise and support the vehicle See: Maintenance.
2. Hold the stabilizer link (5) shafts with a wrench and remove the link nuts at the stabilizer bar (3).
3. Remove the retainers (1) and grommets (2) from the stabilizer bar links (5).
4. Remove the stabilizer bar link nuts from the axle brackets.
5. Remove the links (2) from the axle brackets with Tie Rod Puller C-3894-A (1).
Installation
INSTALLATION
NOTE: All views are typical.