RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
8. Connect the blue/white wire into linear solenoid number three (3).
9. Connect the yellow/black wire into linear solenoid number one (4).
10. Connect the brown/red wire to the oil temperature sensor (7) jumper harness.
11. Connect the orange/green to the upper valve body jumper harness (10).
12. Secure the valve body solenoid harness at clamps (8) and (9).
NOTE: There should be no harness wires between the two arrows.
VALVE BODY OIL SWITCH HARNESS
13. Install the yellow wire onto oil pressure switch number six (9).
14. Install the black wire onto oil pressure switch number three (10).
15. Install the red wire onto oil pressure switch number two (11).
16. Install the brown wire onto oil pressure switch number one (12).
17. Connect the blue/white wire into linear solenoid number four (3).
18. Connect the brown/red wire into linear solenoid number two (6).
19. Connect the yellow wire into the on/off solenoid number three (4).
20. Connect the black wire into the on/off solenoid number two (5).
21. Connect the green wire into the on/off solenoid number one (7).
22. Connect the orange wire into the on/off solenoid number four (8).
23. Secure the oil pressure switch harness that is protected with clamps (13), (14) and (15).
