RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
UPPER VALVE BODY HARNESS
NOTE: When installing the jumper harness , fix the harness portion that is protected with the clamp.
23. Install the jumper harness (5) into the clamp (4).
NOTE: Install the oil pressure switch connector (2) so that the orientation of the connector will be in a range of 0-90 degrees downward.
24. Connect the green wire of the jumper harness to the oil pressure switch (2).
NOTE: Install the oil pressure switch connector (3) so that the orientation of the connector will be in a range of 0-45 degrees downward.
25. Connect the orange wire of the jumper harness to the oil pressure switch (3).