RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
11. Install new O-ring (1) on axle flange (2).
12. Install axle shaft (1) into the hub (2) and axle.
13. Install axle bolts (1) through axle flange (2) and tighten to 133 Nm (98 ft. lbs.).
11. Install new O-ring (1) on axle flange (2).
12. Install axle shaft (1) into the hub (2) and axle.
13. Install axle bolts (1) through axle flange (2) and tighten to 133 Nm (98 ft. lbs.).