RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
3. Raise left end (1) of axle six inches. Hold in this position for one minute to fill right hub (2) with lubricate.
4. Lower the axle.
5. Remove fill plug (1), from right side of carrier.
6. With axle level, fill carrier with lubricant to the bottom of the fill plug hole.
NOTE: Axle will require approximately 1.18 L (40 oz.) of additional lubricant.
7. Install fill plug (1) and tighten to 68 Nm (50 ft. lbs.).