RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Overdrive Switch: Service and Repair
Tow/Haul Switch - Installation
INSTALLATION
NOTE: There is enough slack in the wire to pull out the connector from the lever.
1. Pull the connector (2) out of the lever (1) just enough to grasp it.
CAUTION: Be careful not to bend the pins on the tow/haul overdrive off switch. Use care when installing the switch, as it is not indexed, and
can be accidentally installed incorrectly.
2. Install the tow/haul overdrive off switch (3) into the connector (2).
3. Push the tow/haul overdrive off switch (3) and wiring into the shift lever (1).
4. Install the tow/haul overdrive off switch retainer onto the shift lever.