RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Back Window Motor: Service and Repair
Rear Sliding Window Regulator Motor - Installation
INSTALLATION
1. Install the power motor to the regulator with the 3 screws (1).
2. Connect the electrical connector to the power motor.
3. Install the 2 mounting bolts (1).
4. Install the rear cab back panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cab Back Trim Panel - Installation.
5. Install the rear seats See: Body and Frame/Seats/Service and Repair/Seat, Center/Seat - Installation.
6. Connect the battery negative cable.
