RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
6. Route the seat belt (3) through the slot in the lower B-pillar trim panel (1) and position the trim panel to the B-pillar (2).
7. Engage the retaining tabs that secure the lower B-pillar trim panel to the B-pillar.
8. Install the upper B-pillar trim panel.
9. Install the rear door sill trim cover.
10. Install the cowl trim panel.
Removal
REMOVAL
REGULAR CAB
1. Remove the cap (1) and then the bolt (2) that secures the seat belt (3) to the top of the B-pillar (4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper B-pillar trim panel (5) to the B-pillar and remove the
trim panel.
QUAD CAB