RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Exhaust Pipe: Service and Repair
Pipe-Exhaust
Removal
6.7L DIESEL
1. Raise and support the vehicle on a hoist.
2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Remove the exhaust pipe-to-DOC/DPF flange nuts.
4. 4X4 Vehicles - Remove transfer case skid plate.
5. 4X4 Vehicles - Remove transmission crossmember.
6. Remove the exhaust pipe-to-turbocharger clamp and discard.
7. Remove the transmission mounted exhaust pipe support.
8. Separate the exhaust pipe and extension pipe.
9. Remove exhaust pipe.
Inspection
INSPECTION
Discard rusted clamps, broken or worn supports and attaching parts. Replace a component with original equipment parts, or equivalent. This will assure
proper alignment with other parts in the system and provide acceptable exhaust noise levels.
Installation
6.7L DIESEL