RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
2. Position EGR valve assembly (2) and two new gaskets to intake connection (3).
3. Install two EGR valve mounting bolts (1) and two nuts (1). Tighten four nuts/bolts finger tight only.
4. Install and lightly tighten two clamps (1) and (6) at ends of EGR Crossover Tube.
5. Install bolt (3) finger tight only.
6. Tighten clamp (6) first to 10 Nm. (7 ft. lbs.), then tighten clamp (1) to 10 Nm. (7 ft. lbs.).
7. Tighten tube bolt (3) to 10 Nm (7 ft. lbs.).