RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
11. Install EGR valve heat shield (2). Tighten bolts/nuts to 10 Nm (7 ft. lbs.).
12. Connect both negative battery cables to both batteries.
Installation-Cab/Chassis Models
INSTALLATION-CAB/CHASSIS MODELS
1. Install new gasket (1) to end of EGR tube.
2. Position EGR valve assembly (2) and two new gaskets to intake connection (3).
3. Install two EGR valve mounting bolts (1) and two nuts (1). Tighten four nuts/bolts finger tight only.