RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
11.
Place a transmission jack under the back of the fuel tank to support the tank (Figure 2).
CAUTION:
Place a block of wood on the transmission jack to prevent damage to the fuel tank.
12.
Remove and discard the rear fuel tank strap nut.
13.
Using the transmission jack, lower the back of the fuel tank slightly.
14.
Remove and discard the original rear fuel tank strap.
15.
Insert the new rear fuel tank strap into the frame side slot and align the strap over the fuel tank stud.
16.
Hand-start the new fuel tank strap nut.
17.
Carefully raise the fuel tank into position using the transmission jack.
18.
Tighten the fuel tank strap nut to 45 ft. lbs. (61 N.m).
19.
Lower and remove the transmission jack.
20.
Lower the vehicle from the hoist.
