RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
b. If NO »> then this Bulletin does not apply. Further diagnosis is required.
PARTS REQUIRED:
REPAIR PROCEDURE:
NOTE:When the clutch pressure plate over-adjusts, the plate diaphragm fingers appear to be flat (collapsed) and marks on the clutch disc will be present
due to contact with the collapsed plate diaphragm fingers.
1.
Replace the dual mass flywheel, pressure plate, clutch disc, and plate attaching bolts.
Refer to TechCONNECT for detailed service repair procedures. From TechCONNECT select: the "Service Info" tab and enter vehicle
information (year, model, and engine).
Select: 6 - Clutch > Flywheel and Disc - Clutch > Removal, Installation, and Adjustments.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.