RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Exhaust Pipe: Service and Repair
Exhaust Pipe - Removal
6.7L DIESEL - CAB CHASSIS
1. Raise and support the vehicle on a hoist.
2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Remove the exhaust pipe-to-DOC/DPF flange nuts (2).
4. 4X4 Vehicles - Remove transfer case skid plate See: Body and Frame/Frame/Skid Plate/Service and Repair/Transfer Case Skid Plate/Removal .
5. 4X4 Vehicles - Remove transmission crossmember See: Body and Frame/Frame/Cross-Member/Service and Repair/Crossmember - Removal .
6. Remove the exhaust pipe-to-turbocharger clamp (5) and discard.
7. Remove the transmission mounted exhaust pipe support (4).
8. Separate the exhaust pipe (3).
9. Remove exhaust pipe (3).