RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
![background image](/dodge/ram_3500_hd_4wd/l6-6.7l_dsl_turbo/Page-2338002.png)
4. Remove output shaft and disconnect seal (1) with Remover 8420A (2) and Slide Hammer C-3752.
Installation
INSTALLATION
1. Verify output shaft bearing cup (1) is seated in disconnect pocket (2).
4. Remove output shaft and disconnect seal (1) with Remover 8420A (2) and Slide Hammer C-3752.
Installation
INSTALLATION
1. Verify output shaft bearing cup (1) is seated in disconnect pocket (2).