RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
7. Mark a line across the pinion shaft and flange for installation reference.
8. Remove pinion flange (1) with Pinion Flange Puller 8992 (2).
9. Remove pinion seal with a seal puller.
Installation
INSTALLATION
1. Install new pinion seal with Installer 8882 (2) and Handle C-4171 (1).
2. Apply a light coat of teflon thread sealant, to pinion flange splines.
3. Install flange on the pinion shaft with the reference marks aligned.
4. Lightly tap pinion flange onto the pinion, until a few threads are showing.
5. Install flange washer and new pinion nut.
6. Hold flange (1) with Flange Wrench 8979 (2) and tighten pinion nut until pinion end play is taken up.