RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
![background image](/dodge/ram_3500_hd_4wd/l6-6.7l_dsl_turbo/Page-2366002.png)
4. Slide boot (1) off boot collar (2) and separate the two shafts.
5. Position Bearing Splitter Tool 1130 (1) between propeller shaft and center bearing (2).
6. Install Bridge 938 (3) on the splitter (1) and remove center bearing.
4500 AND 5500
1. Remove rear propeller shaft.
2. Make installation reference marks on rear shaft, center bearing yoke (1) and front shaft (2).