RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Align the bulb holder and bulb (3) with the keyed opening in the circuit board of the Electronic Vehicle Information Center (EVIC) (2).
2. Insert the bulb holder and bulb straight into the circuit board until the bulb holder is firmly seated.
3. Using a small thin-bladed screwdriver, rotate the bulb holder clockwise about 30 degrees on the circuit board to lock it into place.
4. Reinstall the overhead console (1) onto the headliner.
5. Reconnect the battery negative cable.
