RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Trailer Connector: Service and Repair
Installation
INSTALLATION
1. Position the 7-way trailer tow connector (2) into the mounting hole on the face of the rear bumper (1).
2. Position the tapping plate (4) over the 7-way trailer tow connector on the back of the rear bumper.
3. Install and tighten the four screws (3) that secure the 7-way trailer tow connector to the tapping plate. Tighten the screws to 2 Nm (17 in. lbs.).
4. Reach behind the center of the rear bumper to access and reconnect the connector (2) of the body wire harness to the 7-way trailer tow connector
(1).
5. Reconnect the battery negative cable.