RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Truck Bed: Service and Repair
Cargo Box
Removal
REMOVAL
NOTE: Long cargo box shown in illustration. Short cargo box similar.
1. Remove the screws (1) that secure the fuel filler (2) to the cargo box (3).
2. Remove the fuel filler from the cargo box and position it out of the way.
3. If necessary, remove the fuel filler door from the cargo box.
4. Disconnect the tail lamp wire harness from the underbody wire harness.
5. If necessary, remove the tail lamp units and wire harness from the cargo box.
6. If necessary, remove the tailgate.
7. If necessary, remove the rear bumper.
8. Remove the bolts (3) that secure the cargo box (1) to the frame (2) (six short box, eight long box) and remove the cargo box.
Installation
INSTALLATION