dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Dash Silencer Pad Support Bracket Installation|Page 13683 > < Service Port HVAC|Removal|Page 13674
Page 1
background image

Technical Service Bulletin # H34

Date: 090120

Recall - Dash Silencer Pad Support Bracket Installation

January 2009

Dealer Service Instructions for:

Safety Recall H34
Dash Silencer Pad

Models

2007-2008

(DH)

Dodge Truck

(D1)

Dodge Truck

(DC)

Dodge Truck

(DM)

Dodge Truck

NOTE

This recall applies only to the above vehicles equipped with a 6.7L diesel engine (sales code ETJ) built through November 5, 2007 (MDH 110523).

IMPORTANT

Some of the vehicles within the above build period have already been inspected or repaired and, therefore, have been excluded from this recall.

IMPORTANT

Some of the involved vehicles may be in dealer new vehicle inventory. Federal law requires you to complete this recall service on these vehicles
before retail delivery. Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in
for service. Involved vehicles can be determined by using the VIP inquiry process.

Subject

The dash silencer pad on about 110,000 of the above vehicles may sag and contact the exhaust gas recirculation (EGR) cooler. This may cause the dash
silencer to locally overheat and cause an underhood fire without warning.

Repair

All vehicles must have a dash silencer pad support bracket installed.

Parts Information

Completion Reporting and Reimbursement

Claims for vehicles that have been serviced must be submitted on the
DealerCONNECT Claim Entry Screen located on the Service tab. Claims
submitted will be used by Chrysler to record recall service completions and provide dealer payments.

Recall - Dash Silencer Pad Support Bracket Installation|Page 13683 > < Service Port HVAC|Removal|Page 13674