RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Technical Service Bulletin # K01
Date: 100510
Recall - ECM Update For OBD Readiness
May 2010
Dealer Service Instructions for:
California Emissions Recall K01
Reprogram ECM OBD Readiness
Effective immediately all repairs on involved vehicles are to be performed
according to this notification. Service Bulletin 18-038-09 is no longer applicable for the involved vehicles only.
Models
2003 (DR) Dodge Ram Truck (2500/3500 series pickup)
NOTE:
This recall applies only to the above vehicles equipped with a 5.9L diesel engine (sales code ETC) and a California emission control system (sales
code NAE).
2006-2007 (DH/D1) Dodge Ram Truck (2500/3500 series pickup)
NOTE:
This recall applies only to the above vehicles equipped with a 5.9L diesel engine (sales code ETH) and a California emission control system (sales
code NAE).
2007 (DC) Dodge Ram Truck (3500 series cab chassis)
NOTE:
This recall applies only to the above vehicles equipped with a 6.7L diesel engine (sales code ETJ) and a California emission control system (sales
code NAE) built through January 5, 2007 (MDH010508).
IMPORTANT:
Some of the involved vehicles may be in dealer used vehicle
inventory. Dealers should complete this recall service on these vehicles before retail delivery. Dealers should also perform this recall on vehicles in for
service.
Involved vehicles can be determined by using the VIP inquiry process or GRS DealerCONNECT functions.
Subject
The Engine Control Module (ECM) on about 25,208 of the above vehicles may fail to accurately report diagnostic system information with some generic
scan tools.
This may cause the vehicle to be rejected or fail an Inspection/Maintenance Test (also known as a Smog Check).
Repair
The Engine Control Module (ECM) must be reprogrammed (flashed).
Parts Information
Due to the likelihood that the required labels are already in your parts inventory, no labels will be distributed initially. The following label may be
ordered as needed.
Each vehicle requires application of the following label:
Part Number
Description
04275086AB
Authorized Modifications Label
Special Tools