RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
9. Remove the upper ball joint retaining nut and separate the upper ball joint (4) from the knuckle (6) using separator 9360 (5).
10. Remove the stabilizer link lower nut (2).
11. Remove the axle hub nut.
12. Remove the shock assembly (1).
Installation
4X4-COIL OVER
NOTE: All suspension components should be tighten with the weight of the vehicle on them (curb height).
1. Install the shock (1) back in place in the vehicle.