RAM 3500 Van V8-318 5.2L Magnum (1996)
Technical Service Bulletin # 080197
Date: 970203
Discussion
NO: 08-01-97
GROUP: Electrical
EFFECTIVE DATE: Feb. 3, 1997
SUBJECT:
JTEC Powertrain Control
Module Wiring Harness
Connector Repair Packages
MODELS:
1996 - 1997
(AB)
Ram Van
1996 - 1997
(AN)
Dakota
1996 - 1997
(BR)
Ram Truck
1996 - 1997
(SR)
Viper/Viper GTS
1997
(TJ)
Wrangler
1996-1997
(XJ)
Cherokee
1996-1997
(ZJ)
Grand Cherokee
1996 - 1997
(ZG)
Grand Cherokee (International Markets)
DISCUSSION:
The following Jeep/Truck Engine Controller (JTEC) Powertrain Control Module (PCM) electrical connector and terminal repair components are
available to aid in powertrain electrical wiring repairs. These components allow repairs of individual wiring circuits without the need to replace the entire
engine harness. If you have determined that a powertrain customer complaint could be related to a poor electrical connection, the PCM connectors
should be inspected. The following diagnosis and inspection can be utilized to determine the condition of the PCM connectors and their terminals.
Diagnosis
Inspection of the connector begins with a thorough inspection of the insulator.
1.
Record the radio station presets.
2.
Disconnect and isolate the battery negative cable (both batteries should be disconnected if the vehicle is equipped with a 5.9L Cummins Diesel).
3.
Disconnect the connector from the PCM.