RAM 3500 Van V8-360 5.9L Magnum (1995)
d. Attach a socket/wrench to the pulley mounting bolt of the automatic tensioner.
e. Rotate the socket/wrench clockwise. Place the belt over the idler pulley. Let tensioner rotate back into place. Remove wrench. Be sure belt is
properly seated on all pulleys.
f.
Install Jeep/Truck Engine Controller (JTEC).
8. Fill cooling system.
9. Connect negative battery cable to battery.
10. Start and warm engine. Check for leaks.
11. Install engine cover (if A/C equipped).