RAM 3500 Van V8-5.2L CNG VIN T (1996)
Fuel Tubes On Left Cylinder
11. Connect fuel tube (line) to cylinder. A Go No-Go gauge tool must be used to check fitting after tightening.
12. Connect electrical harness connector to fuel gauge pressure sensor.
13. Install valve guard to frame rail.
14. Check cylinder fuel control valve and fuel tube fittings for natural gas leaks.
15. Install heat shield to frame rail.
Right Side Cylinder
REMOVAL
1. Purge fuel system.
2. Raise and support vehicle.
Guard At Front Right Cylinder
3. Remove the 2 shield (guard) bolts at front of cylinder.