RAM 3500 Van V8-5.2L CNG VIN T (1996)
POWER LOCK/REMOTE KEYLESS ENTRY MODULE
(1) Disconnect the battery negative cable.
(2) Remove the six screws fastening the instrument cluster hood and bezel assembly. Pull the bezel off of the upper retaining clips.
(4) Remove the radio ground strap screw.
(5) Pull the radio out from the instrument panel far enough to disconnect the wiring and antenna lead.
(6) Remove the radio.
(7) Working through the radio opening, remove the two screws securing the power lock/RKE module to the dash panel.
(8) Unplug the two wiring connectors and remove the module.
(9) Reverse the removal procedures to install.
