RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Cowl Moulding / Trim: Service and Repair
Removal
REMOVAL
1. Remove the wiper arms See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arms - Removal .
2. Disconnect the cowl plenum washer hose from the washer supply hose at the molded plastic in-line fitting See: Wiper and Washer
Systems/Windshield Washer Hose/Description and Operation/Description .
3. Remove the cowl weather seal from the front of the dash panel and the cowl grille (2).
4. Remove the six push pin fasteners (1) that secure the front of the cowl grille to the dash panel.
5. Remove the two screws (3) that secure the rear corners of the cowl grille to the dash panel and remove the grille.
6. If necessary, remove the washer nozzles and the cowl plenum washer hose from the cowl grille See: Wiper and Washer Systems/Windshield
Washer Spray Nozzle/Service and Repair/Removal .