RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
![background image](/dodge/ram_4500_chassis_cab_2wd/l6-6.7l_dsl_turbo/Page-3597001.png)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel, See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
Center Bezel - Removal .
3. Disconnect the switch/module electrical connectors.
4. Using an appropriate flat bladed tool, remove the heated seat switch/module from the bezel.