RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Truck Bed: Service and Repair
Cargo Box - Installation
INSTALLATION
NOTE: Long cargo box shown in illustration. Short cargo box similar.
1. Position the cargo box (1) onto the frame (2) and loosely install the bolts (3) (six short box, eight long box).
2. Align the cargo box to the cab and tighten the bolts to 108 Nm (80 ft. lbs.).
3. If removed, install tail lamp units and wire harness onto the cargo box See: Lighting and Horns/Service and Repair/Removal and
Replacement/Rear Lamp Unit - Installation .
4. Connect the tail lamp wire harness to the underbody wire harness See: Locations .
5. If removed, install the tailgate See: Tailgate/Service and Repair/Installation .
6. If removed, install the rear bumper See: Bumper/Rear Bumper/Service and Repair/Installation .
7. If removed, install the fuel filler door See: Doors, Hood and Trunk/Fuel Door/Service and Repair/Installation .
8. Position the fuel filler (2) to the cargo box (3).
9. Install the screws (1) that secure the fuel filler to the cargo box. Tighten the screws to 2.2 Nm (20 in. lbs.).