RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Inner Belt Molding
Removal
REMOVAL
1. Remove the door trim panel (5) See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim Panel -
Removal .
2. Separate the belt molding (2) from the rear door mounting flange from the back to the front.
Installation
INSTALLATION
1. Position the belt molding (2) and seat onto the rear door mounting flange fully.